BT80 Lock Nut
- SKU:
- ENGJL-BT-LN
- Weight:
- 0.10 LBS
Standard OEM replacement Lock Nut for use with BT80 Engine Kits.
Related Products
BT80 Half Moon Key
Standard OEM replacement Half Moon Key for use with BT80 Engine Kits.
Air Cleaner Housing Stud Nut (set of 2) (Part #57)
4 Stroke Engine Replacement Part # 57 -- Air Cleaner Housing Stud Nut (set of 2)
M6 Lock Nut Wide Base
M6 Lock nut is ideal for tightening in areas where there is a lot of vibration.
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Clutch Lock Nut
Standard OEM replacement Clutch Lock Nut for use with BT80 Engine Kits.
Customers Also Viewed
BT80 Half Moon Key
Standard OEM replacement Half Moon Key for use with BT80 Engine Kits.
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Pull Start Cup
Standard OEM replacement Pull Start Cup for use with BT80 Engine Kits.
BT80 Pull Start Handle
Standard OEM replacement Pull Start Handle for use with BT80 Engine Kits.
BT80 Engine Mounting Bracket
Standard OEM replacement Engine Mounting Brackets for use with BT80 Engine Kits. Designed to work with the BT80 kit only, these engine brackets attach directly to the crankcase of your engine and are...
BT80 Gasket #8
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the cylinder body and the intake manifold.
BT80 Gasket #3
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the pull start and engine side cover.
BT80 Gasket #5
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the gearbox cover and the crankcase.
BT80 Gasket #1
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes in center of the crankcase.
BT80 Clutch Lock Nut
Standard OEM replacement Clutch Lock Nut for use with BT80 Engine Kits.
BT80 Outer Rotor
Standard OEM replacement Outer Rotor for use with BT80 Engine Kits. The outer rotor houses the generator coil and is equipped with permanent magnets whose rotation generates voltage in the stationary...
Brass Cable End with Screw (Part #31)
The Brass Cable End Screw is used for getting the right tension on either the clutch cable or throttle cables on any 2-stroke engine kit. It easily slides onto the cable and once the tension has been...