CNC Billet Aluminum Air Intake – 40 mm Engine Intake
- SKU:
- ENGJL-CNCAI*
- Weight:
- 0.25 LBS
Looking for an easy upgrade to boost the performance of your two-stroke gas powered motorized bicycle engine kit?
This CNC billet aluminum intake manifold fits on most Zeda 2-stroke bicycle engine kits, features an O-ring seal for an airtight fit that helps prevent any vacuum leaks that can cause poor idle quality or bogging. This intake is also designed to match the intake port of your Zeda 2-stroke gas engine cylinder to provide a smooth flow as well as reduce turbulence for your air/fuel mix which can help improve performance.
This is intake is compatible with engines that have intake manifolds with 40mm stud spacing and are available in 2 different diameters to fit your specific carburetor: 19mm which can be used with stock 2-Stroke Zeda Engine Kits, as well as ENG2S66-NTCB, ENGJL-KCRB (with shim), ENG2S66-CDC, ENGJL-Z100CARB carburetors, or the 23mm which can be used with ENG2S-SKYC (without shim) carburetors.
Related Products
Intake Manifold
4 Stroke Engine Replacement Part # 8 -- Admitting Pipe
40mm High Performance Aluminum CNC Intake OZ Reed Valve
Soup up your engine today with our 40mm Intake OZ Reed Valve! When modified correctly, this reed valve gives you the potential to increase horse power, create quicker throttle responsiveness, and...
Carb Air Intake Manifold (part #32)
32) Carb Air Intake Manifold 40mm stud spacing.
Intake Gasket (Part #6) for 48cc or 58cc Engine
This Intake Gasket is a direct replacement gasket for the SkyHawk Angle Fire 66cc engine and not compatible with smaller 2-stroke engines.
CNC Aluminum Heavy Duty Bicycle Engine Sprocket Adapter For Motorized Bikes - 40 Tooth
This all aluminum tri-legged rear sprocket clamp makes it easy to install your rear drive sprocket and get it turning true while eliminating any risk of bending or warping your spokes! Compatible...
Customers Also Viewed
New Zeda 80 Complete 80cc 2 Stroke Motorized Bicycle Engine Kit - Firestorm Edition
This is a complete 80cc 2 stroke Bicycle Engine Kit. Get the most recent model of the highly sought after JL Zeda 2 stroke bicycle engine kit with the new updated NT carburetor. Why is the Zeda 80...
40mm High Performance Aluminum CNC Intake OZ Reed Valve
Soup up your engine today with our 40mm Intake OZ Reed Valve! When modified correctly, this reed valve gives you the potential to increase horse power, create quicker throttle responsiveness, and...
Zeda88 Performance Exhaust Pipe Chrome Muffler (MZ65 Replica) For 2 Stroke Motorized Bicycle Engines
Zeda's version of the 2 stroke expansion chamber performance pipe. A very similar copy to the notorious MZ65. Bolt this top seller on to your motorized 2 stroke bicycle engine and gain a huge...
New Zeda 100 Complete 50mm Bore 2 Stroke Bicycle Engine Kit - 80cc/100cc - Firestorm Edition
The Zeda100 (YD100) Complete 80cc/100cc Firestorm Engine Kit is back in stock! Get this new and exclusive model that includes a 50mm bore single piece cylinder, an upgraded CDI, the new performance...
Runtong 2 Stroke Tunable CNS Performance Carburetor V2
These redesigned CNS carburetors feature a handlebar adjustable choke, fuel nipple with the correct angle for the fuel line, plus idle adjustment as well as air flow adjustment to make sure that you...
Zeda 80 Dio Reed & OKO Carb Performance 2 Stroke Bicycle Engine Bike Motor Upgrade Kit
Do you have a stock motorized 2 stroke bicycle engine that you are ready to take to the next level? Greatly enhance your existing bike motor with this performance Dio upgrade kit. Complete add on...
21MM OKO Flat Side Carb For 2 Stroke Bicycle Engines – Performance Carburetor
Boost your 2 stroke bike engine performance with this OKO carb reproduction. Recommended for use with the Dio reed valve and Zeda 80 engine kits. Limited quantities available. Need the whole kit?...
ZTMoto Phantom 85 - Complete 52mm Bore 2 Stroke Motorized Bicycle Engine Kit - True 85cc Bike Motor - 36T Sprocket
Back in stock! All kits will include the new needle bearing. Introducing the ZTMOTO Phantom 85. The first true 85cc 2 stroke engine built for motorized bicycling. More than 2 years in the making...
Zeda 80 Performance 2 Stroke Bicycle Engine Kit With Dio Reed Valve & OKO Carb - Silver
Take your 2 stroke motorized biking to the next level with this performance package that will yield tons of torque and increased speed - now with open transfer ports! This complete Dio performance...
Zeda Screaming Demon V2 Engine-Ready Motorized Bicycle - Built In Gas Tank - Gas Frame Bike
The NEWEST Screaming Demon V2 engine-ready motorized bicycles are back in stock! This gas frame bike features front suspension forks, high capacity 2.4-liter gas tank built into the frame,...
Tunable 2 Stroke CNS Performance Carburetor V2
New redesigned CNS carburetor with improved angle for the fuel line. Also, can accept aftermarket air filters. Features include a choke housing that utilizes a cable from the handle bars to...
40mm Off Set Z Intake Manifold
The Z Intake Manifold allows for an offset carburetor placement. Perfect for larger carburetors or for fitting on a bike frame that would be non-compatible with a normal manifold. *Please note that...