Connecting Rod
- SKU:
- ENG4S-CR5
- Weight:
- 1.50 LBS
Also includes Rod Cap (Part #24) and Oil Splash Fork (Part #25) and also M5x25 Stud (Part #25)
*Oil Flinger Included with Connecting Rod Kit
4 Stroke Engine Replacement Part # 31 -- Link Lever
Related Products
Connecting Rod (Part #26)
Grubee Skyhawk 2-stroke connecting rod. Sold without bearings. Not compatible with long rod Zeda 2-stroke engines. 26) Connecting Rod
Needle Bearing for Connecting Rod (Part # 29)
29) Needle Bearing for Connecting Rod (Part # 29) Needle Bearing for 66cc SkyHawk Angle Fire engine allows for less friction rotating around the crankshaft and overall better performance.
ZTMoto Phantom 85 Needle Bearing for Connecting Rod
Needle Bearing for ZTMoto Phantom 85 engine allows for less friction rotating around the crankshaft and overall better performance.
Oil Splash Fork
The Oil Splash Fork bolts onto the bottom of the connecting rod on a 49cc 4-stroke engine in order to “fling” oil up into the necessary areas for lubrication.
Screw Rod for CDI Attachment
4 Stroke Engine Replacement Part # 37 -- Screw 2
Customers Also Viewed
Connecting Rod (Part #26)
Grubee Skyhawk 2-stroke connecting rod. Sold without bearings. Not compatible with long rod Zeda 2-stroke engines. 26) Connecting Rod
New Zeda 80 Complete 80cc 2 Stroke Motorized Bicycle Engine Kit - Firestorm Edition
This is a complete 80cc 2 stroke Bicycle Engine Kit. Get the most recent model of the highly sought after JL Zeda 2 stroke bicycle engine kit with the new updated NT carburetor. Why is the Zeda 80...
Zeda 80 Performance 2 Stroke Bicycle Engine Kit With Dio Reed Valve & OKO Carb - Silver
Take your 2 stroke motorized biking to the next level with this performance package that will yield tons of torque and increased speed - now with open transfer ports! This complete Dio performance...
4 Stroke Bicycle Engine Replacement Piston
4 Stroke Engine Replacement Part # 28-1 -- Piston
Cover and Gasket for Shift Lever
Cover and Gasket for the Stage III transmission shift lever
Zeda 80 Dio Reed & OKO Carb Performance 2 Stroke Bicycle Engine Bike Motor Upgrade Kit
Do you have a stock motorized 2 stroke bicycle engine that you are ready to take to the next level? Greatly enhance your existing bike motor with this performance Dio upgrade kit. Complete add on...
New Zeda 100 Complete 50mm Bore 2 Stroke Bicycle Engine Kit - 80cc/100cc - Firestorm Edition
The Zeda100 (YD100) Complete 80cc/100cc Firestorm Engine Kit is back in stock! Get this new and exclusive model that includes a 50mm bore single piece cylinder, an upgraded CDI, the new performance...
Zeda 88 Performance Exhaust Pipe Chrome Muffler (MZ65 Replica) For 2 Stroke Motorized Bicycle Engines
Zeda's version of the 2-stroke expansion chamber performance pipe. A very similar copy to the notorious MZ65. Bolt this top seller on to your motorized 2 stroke bicycle engine and gain a huge boost...
21MM OKO Flat Side Carb For 2 Stroke Bicycle Engines – Performance Carburetor
Boost your 2 stroke bike engine performance with this OKO carb reproduction. Recommended for use with the Dio reed valve and Zeda 80 engine kits. Limited quantities available. Need the whole kit?...
Rear Gear Mag Wheel Adapter Kit - 36 or 44 Tooth
Don't mess around with the old rag joint standard installation kit and get the Mag Wheel Adapter Kit! This kit makes installing your rear sprocket on to a mag wheel super quick and effortlessly...
ZTMoto Phantom 85 V3 - Complete 52mm Bore 2 Stroke Motorized Bicycle Engine Kit - True 85cc Bike Motor
The all new Phantom 85 Version 3 is here! New cylinder design eliminates ring snag while optimizing the size of the intake and transfer ports to deliver maximum power. Limited stock available...
Zeda Screaming Demon V2 Engine-Ready Motorized Bicycle - Built In Gas Tank - Gas Frame Bike
The NEWEST Screaming Demon V2 engine-ready motorized bicycles are back in stock! This gas frame bike features front suspension forks, high capacity 2.4-liter gas tank built into the frame,...