Intake Gasket (Part #6) for 48cc or 58cc Engine
- SKU:
- 2S-CA-IG#6
- Weight:
- 0.10 LBS
1 Review Hide Reviews Show Reviews
-
Good gasket
Exactly what I expected
Related Products
Aluminum Head Gasket (Part #3)
3) Aluminum Head Gasket For use with the 48cc/58cc Skyhawk engine or use the 66cc Zeda version for the 2-stroke. Aluminum head gasket thickness 0.7mm (+/- 0.02mm).
M6x106 Double Threaded Stud
3) Aluminum Head GasketFor us with the 48cc/58cc engine or use the 66cc version for the SkyHawk Angle Fire 2-stroke. Replacement Cylinder Head Mounting Stud
BT80 Clutch Side Cover
Standard OEM replacement Clutch Side Cover for use with BT80 Engine Kits. Located on the side of your electric start two-stroke motorized bicycle engine, this cover is intended to keep dirt out of...
Clutch Cable
Standard replacement clutch cable for Zeda 2-stroke engine kits. Also suitable as a replacement rear brake cable for Zeda Screaming Demon engine ready bicycles.
ZTMoto Phantom 85 Bicycle Engine Reed Valve Intake Gasket
Replacement reed valve intake gasket for the 2 stroke Phantom 85 bicycle engine. The right gasket helps to make sure to keep your motorized bike engine running like it should.
Customers Also Viewed
Zeda 80/100 Carburetor Intake Gasket (Part #6) - 2 Stroke Motorized Bicycle
Replacement intake gasket for 2 stroke bicycle engines. For use with 66cc/80cc/100cc - Zeda 80/Zeda 100 - Fits most NT & Speed carbs.
Inner Gear Box Gasket
Inner Gear Box Gasket for Stage II and III transmissions.
Tunable 2 Stroke CNS Performance Carburetor V2
New redesigned CNS carburetor with improved angle for the fuel line. Also, can accept aftermarket air filters. Features include a choke housing that utilizes a cable from the handle bars to...
Runtong 2 Stroke Tunable CNS Performance Carburetor V2
These redesigned CNS carburetors feature a handlebar adjustable choke, fuel nipple with the correct angle for the fuel line, plus idle adjustment as well as air flow adjustment to make sure that you...
Zeda 80 NT Carburetor - 80cc/66cc 2 Stroke Motorized Bicycle / Bike Engine Carb
Updated NT carburetor for Zeda80 bicycle engine kits. This carburetor now features a more robust intake attachment with internal o-ring to reduce air leaks.
21MM OKO Flat Side Carb For 2 Stroke Bicycle Engines – Performance Carburetor
Boost your 2 stroke bike engine performance with this OKO carb reproduction. Recommended for use with the Dio reed valve and Zeda 80 engine kits. Limited quantities available. Need the whole kit?...
Intake Manifold
4 Stroke Engine Replacement Part # 8 -- Admitting Pipe
Aluminum Head Gasket (Part #3)
3) Aluminum Head Gasket For use with the 48cc/58cc Skyhawk engine or use the 66cc Zeda version for the 2-stroke. Aluminum head gasket thickness 0.7mm (+/- 0.02mm).
Copper Head Gasket For Zeda 100 Max Firestorm 2 Stroke Engine
Use this Zeda 100 Max copper head gasket to create a perfect seal between the head and the cylinder. Copper is an ideal material for gaskets since it conforms to the surface to create a tight seal...
40mm Off Set Z Intake Manifold
The Z Intake Manifold allows for an offset carburetor placement. Perfect for larger carburetors or for fitting on a bike frame that would be non-compatible with a normal manifold. *Please note that...
Carb Air Intake Manifold (part #32)
32) Carb Air Intake Manifold 40mm stud spacing.
Runtong Performance 2 Stroke Carburetor
Do you want performance and horsepower? Then get this upgraded Carburetor today! Compatible with Zeda 80 and SkyHawk 2 stroke engines.