BT80 Gasket #3
- SKU:
- ENGJL-BT-GSKT3
- Weight:
- 0.10 LBS
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the pull start and engine side cover.
Related Products
BT80 Gasket #8
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the cylinder body and the intake manifold.
BT80 Gasket #1
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes in center of the crankcase.
BT80 Gasket #5
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the gearbox cover and the crankcase.
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Gasket #2
Standard Sprocket Cover/Crankcase OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and the crankcase.
Customers Also Viewed
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Gasket #1
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes in center of the crankcase.
BT80 Gasket #5
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the gearbox cover and the crankcase.
BT80 Gasket #8
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the cylinder body and the intake manifold.
BT80 Engine Mounting Bracket
Standard OEM replacement Engine Mounting Brackets for use with BT80 Engine Kits. Designed to work with the BT80 kit only, these engine brackets attach directly to the crankcase of your engine and are...
BT80 Gasket #2
Standard Sprocket Cover/Crankcase OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and the crankcase.
BT80 Crankshaft Oil Seal
Standard OEM replacement Crankshaft Oil Seal for use with BT80 Engine Kits.
21MM OKO Flat Side Carb For 2 Stroke Bicycle Engines – Performance Carburetor
Boost your 2 stroke bike engine performance with this OKO carb reproduction. Recommended for use with the Dio reed valve and Zeda 80 engine kits. Limited quantities available. Need the whole kit?...
BT80 Pull Start Cup
Standard OEM replacement Pull Start Cup for use with BT80 Engine Kits.
BT80 Crankcase Bearing (set of 2)
Standard OEM replacement Crankcase Bearings for use with BT80 Engine Kits. Crankcase bearings install into the case of your engine and support your crankshaft so it can turn smoothly.
BT80 Lock Nut
Standard OEM replacement Lock Nut for use with BT80 Engine Kits.
Copper Head Gasket (Part #3)
#3 - Head Gasket, for use with 66/80cc Zeda 2-stroke engines. Our copper head gasket is a great choice to get the full performance from your 2-stroke engine. Copper is malleable so it fully conforms...