BT80 Gasket #5
- SKU:
- ENGJL-BT-GSKT5
- Weight:
- 0.10 LBS
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the gearbox cover and the crankcase.
Related Products
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Gasket #3
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the pull start and engine side cover.
BT80 Gasket #8
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the cylinder body and the intake manifold.
BT80 Gasket #2
Standard Sprocket Cover/Crankcase OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and the crankcase.
BT80 Gasket #1
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes in center of the crankcase.
Customers Also Viewed
BT80 Gasket #4
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and engine side cover.
BT80 Gasket #3
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the pull start and engine side cover.
BT80 Gasket #1
Standard OEM replacement gasket for use with BT80 Engine Kits. This gasket goes in center of the crankcase.
BT80 Gasket #2
Standard Sprocket Cover/Crankcase OEM replacement gasket for use with BT80 Engine Kits. This gasket goes between the sprocket cover and the crankcase.
BT80 Pull Start Cup
Standard OEM replacement Pull Start Cup for use with BT80 Engine Kits.
BT80 Engine Mounting Bracket
Standard OEM replacement Engine Mounting Brackets for use with BT80 Engine Kits. Designed to work with the BT80 kit only, these engine brackets attach directly to the crankcase of your engine and are...
BT80 Throttle Switch
Standard OEM replacement Throttle Switch for use with BT80 Engine Kits. The throttle switch is responsible for starting and shutting off the engine. Connected to the starting relay, voltage regulator...
BT80 Pull Start Handle
Standard OEM replacement Pull Start Handle for use with BT80 Engine Kits.
6 Bolt Rear Sprocket (Mag Wheel Compatible) - 44 Tooth
This 44 tooth sprocket is required for use with the Zeda Angel Roller V2 Bicycle. Includes 6x: mounting bolts, washers, and lock washers.
BT80 Crankshaft Oil Seal
Standard OEM replacement Crankshaft Oil Seal for use with BT80 Engine Kits.
Zeda 80/100 Carburetor Intake Gasket (Part #6) - 2 Stroke Motorized Bicycle
Replacement intake gasket for 2 stroke bicycle engines. For use with 66cc/80cc/100cc - Zeda 80/Zeda 100 - Fits most NT & Speed carbs.
Aluminum Head Gasket (Part #3)
3) Aluminum Head Gasket For use with the 48cc/58cc Skyhawk engine or use the 66cc Zeda version for the 2-stroke. Aluminum head gasket thickness 0.7mm (+/- 0.02mm).