Bicycle Turn Signal/Blinkers & Tail Light Kit

Are you tired of people almost running you over because they can’t tell which direction you are turning? Eliminate that fear with this Bicycle Turning Light kit! This kit features a left and right turn signal, a horn to alert others, and a tail light all activated by a single controller. Also included is a pressure activated brake light that will shine when you squeeze your brakes without you pressing a single button!

Features

• 7 Different flashing functions including a steady on option.
• Horn has 8 different options to choose from.
• Sliding switch to signal left or right turn that also can be accompanied by a sound selection.

• Horn Noise Level: ~110db.
• Tail/Brake Light Diodes: 5x Red (Brake activated)
• Turn Signal Light Diodes: 3x Yellow (Turn Signal Switch activated)
• Total Amount of Light Diodes: 11 super bright LED
• Function: Tail Light, Brake Light, Turn Signals, Horn
• Ingress Protection: Rain-resistant when properly installed. Not to use in water.
• Battery: 2*AA ( Not included )
• Turning LED Light Dimensions: ~5.2”L x 2.17”H x 1.18”D
• Horn dimension:~ 8cm*6.2cm*3.2cm
• Wire length ~90.5 Inches
• Compatible with 20-25mm Tubes

• The controller with built in horn is installed on the handlebars.
• The brake taillight can be installed on the seat tube or rear rack.
• The rear brake light control button is mounted on the front or rear brake cable. When the brake is engaged, the control button is pressed, and the brake light is activated.
• To insert or replace batteries, the screw on the lower end of the brake light must be removed, open the compartment and place batteries inside.